RS Bitukold Spray
RS Bitukold Spray is a rapid setting, cold applied Bitumen
emulsion designed for sealing vertical joints.
The cationic formulation of RS Bitukold Spray ensures a rapid
set even in cold, damp conditions, with an initial cure taking
place within 15 minutes.
RS Bitukold Spray is mainly used for the protection of new
joints in freshly laid asphalt or macadam.
Where to use?
- Transverse or longitudinal vertical joints
- Patch repairs
- Trench reinstatements
- Drain or manhole frames
- Kerb channels
Ensure that the surface is clean and free from loose materials,
oil, grease, standing water and weeds.
Shake can well and invert. Apply RS Bitukold Spray in even
strokes with nozzle 200-300mm away from area to be treated. Ensure
complete coverage. After use, spray briefly with can in upright
position to clear nozzle. The coverage rate for RS Bitukold Spray
should be 0.7-1.5kg/sq.m., depending on the texture and the
porosity of the surface.
Caution: pressurised container, protect from sunlight. Do not
pierce or burn even after use. Do not expose to temperatures
exceeding 50°C. Do not spray on a naked flame or any incandescent
material. Keep out of reach of children.
RS Bitukold complies with BS 594987 clause 6.8 Joints, vertical
RS Bitukold Spray is supplied in 600ml aerosols.
Read hazard label on can prior to use.
Add RS Bitukold Spray to enquiry list